Precision planetary reducers
The planetary reducers of the SERVOBOX family, SB version are a family of planetary reducers with the highest precision. These reducers are available in axial versions SB and bevel version SBL. The SB-A and SBL-A series in 2-stage versions are distinguished by the possibility of mounting a larger motor shaft. The version with a square flange and through holes in the planetary reducer allows for the installation of screws in the threaded holes of the machine body. Angular backlash s in the SB axial version are from ≤1 arcmin for one degree (i=3/10), from ≤3 arcmin for two degrees (i=15/100) and from ≤5 arcmin for three degrees (i=125/1000) *). In the SBL angle versions, the backlash is ≤2 arcmin for one degree (i=3/20) and ≤4 arcmin for two degrees (i=15/200).
German contact | English contact |
E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
Mob.: +49 (0)1522 5498 597 |
The planetary reducers of the SERVOBOX SE version family is a family of planetary reducers with the highest precision. These reducers are available in axial SE versions and SEL angular version. The SE-A and SEL-A series in 2-stage versions are distinguished by the possibility of mounting a larger motor shaft. The version with a round flange with threaded holes in the planetary reducer allows the installation of screws through the holes in the machine body. Angular backlash s in the SE axial version are from ≤1 arcmin for one degree (i=3/10), from ≤3 arcmin for two degrees (i=15/100) and from ≤5 arcmin for three degrees (i=125/1000) *). In the SEL angle versions, the backlash is ≤2 arcmin for one degree (i=3/20) and ≤4 arcmin for two degrees (i=15/200).
German contact | English contact |
E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
Mob.: +49 (0)1522 5498 597 |
The gearboxes of the SERVOBOX family of the SF version are a family of gearboxes with the highest precision, distinguished by increased bearing resistance to axial and radial loads.
The use of double bearings in the SF series gearboxes is of great importance in applications with slanted modular racks.
These gearboxes are available in axial versions SF and angular version SFL. The SF-A and SFL-A series in 2-stage versions are distinguished by the possibility of mounting a larger motor shaft.
The version with a square flange and through holes in the gearbox allows for the installation of screws in the threaded holes of the machine body.
Angular clearances in the SF axial version are from ≤1 arcmin for one degree (i=3/10) and from ≤3 arcmin for two degrees (i=15/100).
In the SFL angle versions, the clearance is ≤2 arcmin for one degree (i=3/20) and ≤4 arcmin for two degrees (i=15/200).
German contact | English contact |
E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
Mob.: +49 (0)1522 5498 597 |
The planetary reducers of the SERVOBOX family of the SD version are the family of planetary reducers with the highest precision. These reducers are available in axial versions SD and angular version SDL.
The SD-A and SDL-A series in 2-stage versions are distinguished by the possibility of mounting a larger motor shaft.
The version with a rotating flange instead of the output shaft from the planetary reducer allows for screw mounting of modular wheels and rotating elements of the machine.
Reducers of this type will be used wherever there is a high risk of angular backlash on couplings.
Angular backlash s in the SD axial version are from ≤1 arcmin for one degree (i=3/10) and from ≤3 arcmin for two degrees (i=15/100).
In the SDL angle versions, the backlash is ≤2 arcmin for one degree (i=3/20) and ≤4 arcmin for two degrees (i=15/200).
German contact | English contact |
E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
Mob.: +49 (0)1522 5498 597 |
The planetary reducers of the FABREDUCER family FB version are a family of economical precision planetary reducers.
The version with a square flange and through holes in the planetary reducer allows for the installation of screws in the threaded holes of the machine body.
Angular backlash s in the FB axial version are from ≤8 arcmin for one degree (i=3/10) and from ≤12 arcmin for two degrees (i=15/100).
FABREDUCER is an ideal solution wherever we need a planetary reducer with still good parameters, but much cheaper than the SERVOBOX planetary reducer.
German contact | English contact |
E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
Mob.: +49 (0)1522 5498 597 |
Reducers from the FABREDUCER family of the FE version are a family of economic precision reducers.
The version with a round flange with threaded holes in the planetary reducer allows the installation of screws through the holes in the machine body.
Angular backlash s in the axial version FE are from ≤8 arcmin for one degree (i=3/10) and from ≤12 arcmin for two degrees (i=15/100).
FABREDUCER is an ideal solution wherever we need a planetary reducer with still good parameters, but much cheaper than the SERVOBOX planetary reducer.
German contact | English contact |
E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
Mob.: +49 (0)1522 5498 597 |
Reducers from the ECONOMIC family of the PB version are a family of precision reducers that are the economic variation of the SB series. These planetary reducers are available in the axial PB version and the PBL angular version.
The PB-A and PBL-A series in 2-stage versions are distinguished by the possibility of mounting a larger motor shaft.
The version with a square flange and through holes in the planetary reducer allows for the installation of screws in the threaded holes of the machine body.
The angular backlash of the PB version is ≤8 arcmin for one degree (i=3/10) and ≤12 arcmin for two degrees (i=15/100).
In the angled PBL versions, the backlash is ≤12 arcmin for one degree (i=3/20) and ≤15 arcmin for two degrees (i=15/200).
German contact | English contact |
E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
Mob.: +49 (0)1522 5498 597 |
Planetary reducers from the ECONOMIC family of the FA version are a family of precision economic planetary reducers.
The version with a square flange and through holes in the planetary reducer allows for the installation of screws in the threaded holes of the machine body.
The angular backlash of the FA version is ≤8 arcmin for one degree (i=3/10) and ≤12 arcmin for two degrees (i=15/100).
German contact | English contact |
E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
Mob.: +49 (0)1522 5498 597 |
Planetary reducers from the ECONOMIC family of the SN version are a family of economic precision planetary reducers.
The version with a round flange with threaded holes in the planetary reducer allows the installation of screws through the holes in the machine body.
The angular backlash of the FA version is ≤8 arcmin for one degree (i=3/10) and ≤12 arcmin for two degrees (i=15/100).
German contact | English contact |
E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
Mob.: +49 (0)1522 5498 597 |
German contact | English contact |
E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
Mob.: +49 (0)1522 5498 597 |
German contact | English contact |
E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
Mob.: +49 (0)1522 5498 597 |