DC servo motors
M2DC brushless servo drives are available in the power range from 60W to 750W and rated torque up to 2.4Nm. The motors are available in three mechanical sizes (flange size 40/60/80mm). They are equipped with an incremental encoder with a resolution of 1024cpr and an optional brake. M2DC series servo drives can be supplied with DC voltage in the range from 20 to 60VDC. They enable control with a step-direction impulse signal, an analog signal or one of the communication protocols: Ethernet IP, CANopen, Modbus RTU, eSCL. Particularly noteworthy is the built-in motion controller, the so-called Qprogrammer, which allows you to write a program directly in the servo amplifier, thanks to which we can relieve the PLC or even resign from its use.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
Power supply voltage: 20-60VDC
Output current: up to 10A (RMS)/20A (peak)
Power: 60-550W
Encoder: incremental 2500 ppr/absolute 18-bit
Brake: optional
Speed: 3000/6000 rpm
Control mode:
pulse,
analog,
network,
built-in controller - Q programmer
I/O signals:
8 programmable digital inputs,
2 fast programmable digital inputs,
6 programmable digital outputs,
2 12-bit analog inputs
Communication:
SCL,
CANopen,
eSCL,
EtherNet/IP, Modbus
Certificate: SERVO Motor Certificate of Compliance
Certificate: SM Servo Motors CE Benart Certificate EMI RFI
Certificate: SM Servo Motors CE Benart Certificate LVD
Certificate: SM Servo Motors CE Declaration LVD
User Manual: Host Command Reference
User Manual: CANopen Communication Instruction
The MDX series integrated servo drives are among the most compact integrated servo motors on the market. The motors are 20% shorter compared to the M2DC series while maintaining the same technical parameters as torque, rotational speed and power. The motors are characterized by very high dynamics, thanks to the reduced moment of inertia. The MDX series servo drives are an all-in-one solution, where you only need to connect the power supply and possibly a communication cable to start working. They are available in two power variants: 200W and 400W in IP20 and IP65.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
The MDX series are high-performance integrated servo drives with power supply of 20-60VDC.
Voltage: 20-60VDC (recommended voltage is 48VDC)
Output current: to 10A (RMS) / 20A (peak)
Power: 200W, 400W
Encoder: incremental 1024 ppr
Rotational speed: 3000/6000 rpm
Control methods:
Pulse
Analog
Network
built-in Q programmer
I/O Signals:
For IP20 version: there are 8 digital inputs, 4 digital outputs, and 2 analog inputs.
For IP65 version: there are 5 digital inputs, 4 digital outputs, and 2 analog inputs.
Communication protocols:
SCL
CANopen
Modbus