DC motoreducers
The ECM series is an economical solution available immediately from the Polish warehouse. It will be perfect wherever you need to transfer rotational movement at an angle of 90 degrees, and high efficiency is less important than an attractive price.
The NDCM series is a unit composed of a simple worm reducer and a high quality (rare earth magnets) ND motor. It will be perfect wherever you need to transfer rotational movement at an angle of 90 degrees, the reducer ratio is not higher than i=100, and the motor must have high power in a small body.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
-
Increase from 100W (S2) to 800W (S2),
Ratios from i=5 to i=100,
Any position of operation,
Modular construction,
Aluminum gearbox housing,
Fully maintenance-free and highly sealed gearbox,
Lubrication of the gearbox with synthetic oil.
The ECP series is a very popular, compact solution, consisting of an EC series DC motor and a planetary reducer. This solution guarantees high efficiency and high reducer ratios while maintaining small dimensions and one drive axis.
The NDP series has the same main characteristics as the ECP series, but is driven by a high quality ND motor. In this way, we obtain an expensive but high-quality solution.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
-
Move from 30W (S2) to 800W (S2),
ratios from i=3.7 to i=307.54,
any position of operation,
compact construction,
lubrication of the gearbox with synthetic grease.
The ECMP series is a variation of the popular and economical ECM series. Thanks to the use of an additional cylindrical stage, we increase the maximum reducer ratio to i=300.
The NDCMP series is an ND class motor and a set of two reducers - a worm reducer with a cylindrical stage, thanks to which the maximum reducer ratio increases to i=300.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
-
Increase from 100W (S2) to 800W (S2),
Ratios from i=15 to i=300,
Any position of operation,
Modular construction,
Aluminum gearbox housing,
Fully maintenance-free and highly sealed gearbox,
Lubrication with synthetic oil.
The ECMP series is a variation of the popular and economical ECM series. Thanks to the use of an additional cylindrical stage, we increase the maximum reducer ratio to i=300.
The NDCMG series is a set of an ND class motor and a small CMG002 helical planetary reducer.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
-
Move from 100W (S2) to 800W (S2),
Transmissions from i=3.62 to i=449.14,
Any position of work,
Modular construction,
Aluminum gearbox body,
Gearbox with feet or with output flange,
Completely maintenance-free and very tight gearbox,
Lubrication of the gearbox with synthetic oil.
The ECMB series is a combination of an EC class motor and a high-quality helical-bevel reducer. When you need a bevel reducer and/or a hollow shaft and want to avoid a low-efficiency worm reducer, the ECMB solution is ideal. The number of possible translations is also much greater.
The NDCMB series is a combination of an ND motor and a CMB402 or CMB502 helical bevel planetary reducer. High-quality motor and transmission cause that we get the best possible drive unit.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
-
Move from 100W (S2) to 800W (S2),
Ratios from i=6.18 to i=211.21,
Any position of work,
Modular construction,
Aluminum gearbox housing,
Gearbox completely maintenance-free and very tight,
Lubrication of the gearbox with synthetic oil.
The ECFT series is a set of EC class motor and FT helical reducer unit. This type of transmission guarantees high rigidity and high reducer ratios.
The NDFT series combines the excellent ND motor and the FT helical planetary reducer. High-quality motors and high efficiency of the FT planetary reducer result in one of the best possible configurations of drive units.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
-
Move from 100W (S2) to 800W (S2),
Ratios from i=20.57 to i=929.40,
Any position of operation,
Modular construction,
Aluminum gearbox body,
Fully maintenance-free and highly sealed gearbox,
Lubrication with synthetic oil.
The ECMM series is a cost-effective solution, available at lightning speed, and designed for applications where a very large reduction in rotational speed is necessary. By using a set of two worm reducers, it is possible to achieve a ratio of up to i=3600 (and thus less than 1 revolution per minute at the output). Another advantage of the ECMM series is the self-locking system.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
-
Move from 100W (S2) to 800W (S2),
Ratios from i=75 to i=3600,
Any position of work,
Modular construction,
Aluminum gearbox body,
Fully maintenance-free and highly sealed gearbox,
Lubrication of the gearbox with synthetic oil.