Mounting ends
Available for screw jacks with a worm gear (M-J) and high-speed screw jacks (G) is a wide range of mounting ends installed at the end of the trapezoidal or ball screw.
Contact
English contact
E-mail: export@pivexin-tech.com
Tel.: +48 32 438 73 01
German contact
E-mail: jb@pivexin-tech.com
Tel.: +48 32 438 73 11
Mob.: +49 (0)1522 5498 597
Mounting plates are often used to secure screws from rotating in screw jacks of the version. Due to its collar configuration and 4x90° hole arrangement, the screw jack ends can be easily adapted to many structural designs.
GK fork end fittings are available for rotary or cardan loads, depending on the size of the screw lift. In combination with swivel adapters, with which the gear housing can also be suspended, rotary movements can be realized in a modular system.
GA Rotary Joints are the equivalent of GK Eye Bolts. They allow for the lifting of movable loads. In combination with swivel adapters, rotary systems for lifting can be constructed. Unlike eye bolts, rotary joints are also available for screw jacks with larger screw diameters.
For high dynamic and high precision applications with screw jacks, high-performance ball joint heads are available. The backlash-free ball joint allows for fast movements, balancing out three degrees of rotational freedom. To avoid rotational moments on the ball joint, high-performance ball joint heads should only be used in non-rotating versions.
The FLG bearing flange is used as a free bearing for the R version with a threaded spindle. The inner ring of the bearing is compatible with the diameter of the centering sleeve. The stainless steel finish is also available.