NEFF Telescopic Screw Jacks - M-TEG/S-TEG
NEFF's S-TEG and M-TEG telescopic lifts are multi-stage synchronously extended screw or ball screw segments. N-sliding screw or VK-version with anti-rotation protection, optionally with end sensors. The drive can be a gearbox, gear wheel or direct connection to the motor via the appropriate adapter and clutch.
The intelligent drive unit provides constant torque and plays throughout the entire stroke. Reduced friction values due to the use of aluminum materials coated with teflon (screw version). Lock nuts in the sliding screw version can be optionally set to damage or wear. In the case of the ball screw version, standard range nuts are used to ensure stock availability and quick replacement.
Contact
English contact
E-mail: export@pivexin-tech.com
Tel.: +48 32 438 73 01
German contact
E-mail: jb@pivexin-tech.com
Tel.: +48 32 438 73 11
Mob.: +49 (0)1522 5498 597
Features:
- Lifting capacity up to 3.47 kN
- Maximum extension length up to 1100 mm (larger on request)
- Extension per turn of the shaft 10 mm (up to 100 mm on request)
- Efficiency of the jack with ball screw up to 76%
- Execution with ball screw.
Characteristics:
- Static load capacity: standard version up to 91,000 N, HEAVY DUTY version up to 213,000 N
- Dynamic load capacity: standard version up to 39,500 N, HEAVY DUTY version up to 78,900 N
- Maximum extension length up to 24,000 mm (larger on request)
- Stroke on shaft rotation from 0.38 mm to 32 mm
- Ball screw pitch 32 mm
- Lifting efficiency of ball screw up to 75%
- Number of stages up to 7
- Possibility of working with M, C or G series gearboxes.
On request |