SN bearing blocks
SN bearing blocks according to DIN 736 are supplied as a set with a roller bearing, a locating sleeve and a housing with seals on both sides. SN blocks are designed for supporting long shafts NEFF GX and ZR.
Contact
English contact
E-mail: export@pivexin-tech.com
Tel.: +48 32 438 73 01
German contact
E-mail: jb@pivexin-tech.com
Tel.: +48 32 438 73 11
Mob.: +49 (0)1522 5498 597
The NEFF Lube 1 automatic grease dispenser is screwed directly to the lubrication point. It works independently and is activated during the set-up time. The grease level is always visible through the transparent window.
Re-adjustment is possible during operation. The service life of the grease dispenser ends after 2 years. The NEFF Lube 1 grease dispenser is available in 4 sizes. When ordering in combination with a ball screw or trapezoidal screw, special requirements for the nut must be specified in the order code.
Note: After installation of the grease dispenser, the total height of the NEFF Lube 1 increases by approximately 25 mm due to the connecting/adapter element.