Servo stepper motors
RS servo stepper motors are basic and at the same time economical, working in a closed feedback loop. The servomotors of the RS series are equipped with an incremental encoder with a resolution of 4096 pulses/rev. They are available in sizes from NEMA11 to NEMA34, with a holding torque of up to 7.2Nm.
AMxxRSxDxx
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
Flange size: 28mm, 42mm, 56mm, 60mm, 86mm;
Power supply voltage: 24-70VDC,
Holding torque: 0.065 - 8Nm
Encoder: 4096 pulses/rev., magnetic
The servomotors of the SS series are advanced drives operating in a closed feedback loop. The servomotors of the SS series are equipped with an incremental encoder with a resolution of 4096 pulses/rev. or 20,000 pulses/rev, optionally also with a brake. They are available in sizes from NEMA11 to NEMA34, with a holding torque of up to 8.2Nm. The main difference from the basic RS version is the higher resolution encoder.
AMxxSSxDxx
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
Flange size: 28mm, 42mm, 56mm, 60mm, 86mm;
Power supply voltage: 24-75VDC,
Holding torque: 0.065 – 8Nm
Encoder: 20000 pulses/rev.
SS-EC and SSDC series servomotors are a variation of the SS series drives, working in a closed feedback loop. These drives have a different type of plug compared to the base SS series, therefore drives marked -N should work with the SS-EC and SSDC series. SS-EC and SSDC series servomotors are equipped with an incremental encoder with a resolution of 4096 pulses/rev. or 20,000 pulses/rev, optionally also with a brake. They are available in sizes from NEMA11 to NEMA34, with a holding torque of up to 8.2Nm.
AMxxSSxDxx-N
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
Flange size: 28mm, 42mm, 56mm, 60mm, 86mm;
Power supply voltage: 24-75VDC,
Holding torque: 0.065 - 8Nm
Encoder: 20000 pulses/rev.