AC servo amplifiers
The M3 is a new series of servo amplifiers from MOONS' with power up to 2kW and a supply voltage of 1/3x230VAC. The M3 servo amplifiers support both incremental encoder motors and absolute encoder motors with 17-bit and 20-bit resolutions with and without battery backup. They are equipped with a range of new safety features, including dynamic braking and safe torque off (STO SIL 2, PL d). In addition, real-time auto-tuning and advanced anti-resonance filters make it easier to parameterize drives and minimize the required deployment time. The M3 servo amplifiers can be equipped with a standard 50-pin I/O connector or a 26-pin spring connector for easy electrical connection.
In the M3 series servo amplifiers, a built-in programmable motion controller (Qprogrammer) is standard, which allows the user to write a program directly into the servo amplifier. This relieves the master controller (e.g. PLC) or in single-axis systems completely eliminates the need for it.The M3 series servo drives support communication in EtherCAT, CANopen and Modbus RTU protocols.For programming and parameterizing the M3 series servo drives, the new MOONS' Luna software is used.This software is characterized by a user-friendly interface with a tree structure, with the possibility of working on multiple windows at the same time. Mechanical system analysis functions (such as FFT analysis, Bode plots) and a comprehensive multi-channel oscilloscope significantly facilitate and speed up the drive startup process, even in the most advanced applications.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
Catalog: MOONS servo drives M3_EN_20220210 series
Certificate: 8602006-M3AC-CE-LVD
Certificate: 8602007-M3AC-CE-EMC
Manual: MOONS M3 servo drives ver. CANopen - user manual_EN_20220701
Manual: MOONS M3EC servo drives ver. EtherCAT - user manual_EN_20220701
Manual: MOONS M3 CANopen communication - user manual_EN_20220803
MOONS' M2DV series servo drives are easy to configure and functional low-power drives (up to 750W) designed for a wide range of automation systems. They can be powered by single-phase 1x 200-230VAC or three-phase 3x 230VAC. They allow control by step-direction pulse signal, analog signal or one of the communication protocols: EtherCAT, EtherNet/IP, CANopen, Modbus RTU, Modbus TCP, eSCL. They are suitable for controlling brushless servomotors equipped with incremental encoders 2500cpr (up to 10,000 imp./rev.)
Particular attention should be paid to the built-in programmable motion controller (Qprogrammer), which allows you to write a program directly in the servo amplifier. This allows for the relief of the master controller (e.g. PLC) or in single-axis systems complete abandonment of its use.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
Motor Power: | 50W - 750W |
Input Voltage: | 1x230VAC, 3x230VAC |
Encoder: | 2500 Lines incremental encoder |
Communications: | MODBUS RTU, MODBUS TCP, CANopen, EtherCAT, EtherNet/IP, eSCL |
Response frequency: | up to 1.6kHz (speed loop frequency) |
Control method: | pulse control (up to 2Mpps) / analog control / network communication |
Inputs - outputs I/O: | 12DI, 6DO, 2AI, pulse inputs, Encoder Feedback Ouput, 2 Line receiver inputs |
Security features: | overload, overcurrent, overvoltage, undervoltage, STO (Safe Torque Off), etc. |
Control modes: | speed/position/torque/mixed control |
Built-in features: | electronic gear, position table, built-in braking module, programmable motion controller - Qprogrammer, autotuning, oscilloscope, anti-resonance filters, etc. |
Configuration software: | M Servo Suite |
Catalog: MOONS M2DV M2DC EN servo drives
Certificate: CE for MOONS M2DV servo drives
Certificate: RoHS for MOONS M2DV servo drives
Certificate: UL for MOONS M2DV servo drives
Instruction: Communication CANopen-MOONS M2-Rev-1.2_EN
Instruction: Communication EtherCAT MOONS M2-Rev-1.0_EN
Instruction: Modbus-RTU_MOONS_EN_20171018 communication
Instruction: Description of commands and registers - Host-Command-Reference_920-0002V
Instruction: MOONS M2DV EtherCAT servo drives - user's manual_EN_20181009
Instruction: MOONS M2DV EtherCAT servo drives - user's manual_EN_20181009
Instruction: MOONS M2DV servo drives - quick start guide
Software: MOONS M2-EtherNetIP-r3.03
The SD700 series servo drives are distinguished by a wide power range from 50W to 55kW (up to 250kW upon request) and an excellent quality-to-price ratio. They can be powered by 1/3x230VAC or 3x400VAC voltage. They are widely used in machine tool industry, CNC machines, textile industry, packaging production, logistics, and robotics. They support resolvers, incremental and absolute encoders with serial communication up to 4Mpps and communication in popular communication protocols such as MODBUS RTU, CANopen, EtherCAT, Mechatrolink, or PROFINET (soon). The fast response of the servo drive (up to 3kHz) allows for a significant reduction in the tuning time, which translates into shorter cycle time and increased productivity.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
Motor Power: | 50W - 55W (up to 250kW special versions) |
Input Voltage: | 1x230VAC, 3x230VAC and 3x400VAC |
Encoder: | 2500 Lines incremental encoder, absolute singleturn/multiturn 17-bit, 23-bit and 24-bit (optical and magnetic) up to 4Mpps and resolvers |
Communications: | MODBUS RTU, CANopen, EtherCAT, Mechatrolink II, Mechatrolink III, PROFINET |
Response frequency: | up to 3kHz (speed loop frequency) |
Control method: | pulse control (up to 4Mpps) / analog control / network communication |
Inputs - outputs I/O: | 9DI, 4DO, 2AI, pulse inputs, Encoder I/O, STO (Safe Torque Off) |
Security features: | overload, overcurrent, overvoltage, undervoltage, errors in regenerative work, STO (Safe Torque Off), etc. |
Control modes: | speed/position/torque/mixed control |
Built-in features: | electronic gear, electronic cam, built-in braking module, dynamic braking, STO (optional), over-travel protection, anti-resonance filters, machine resonance frequency testing (Bode plot), etc. |
Catalog: VEICHI SD700 V7E servo drives 2022 EN
Catalog: VEICHI SD700 VM7 servo drives 2020 EN
Certificate: CE for SD700- EMC
Certificate: CE dla SD700- LVD
Instruction: VEICHI SD700 - PROFINET communication
Instruction: VEICHI SD700 - CANopen comunication
Instruction: VEICHI SD700 - EtherCAT comunication
Instruction: VEICHI SD700 - user's manual v1.4
3D models: SD700 series servo ampliftiers
Configuration files: CANopen .eds
Configuration files: EtherCAT .xml
Kollmorgen's servo drives are some of the most universal and fastest devices of this type in the world. The AKD series servo amplifiers enable cooperation not only with Kollmorgen motors in a Plug&Play manner, but also with motors of other manufacturers. They can control rotary, linear and torque (direct drive) motors. The diversity of supported feedbacks (including resolvers, incremental and absolute encoders with EnDAT 2.1 and EnDAT 2.2, Hiperface, Hiperface DSL, BISS, SFD/SFD3 and analog SIN/COS with a resolution up to 27-bit in standard (up to 32-bit optionally)), wide range of power supply and support for popular communication protocols, such as CANopen, EtherCAT, PROFINET RT, EtherNet/IP, MODBUS TCP, SERCOS, SynqNet or DeviceNet make the AKD series servo drives perfect for your application.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
Motor Power: | up to 32kW |
Input Voltage: | 1/3 x 120/240VAC ( 85-265VAC) or 3x 240/480VAC (187-528 VAC) |
Rated Current: | 3A / 6A / 12A / 24A / 48A |
Rated Current: | 9A / 18A / 30A / 48A / 96A |
Response frequency: | up to 4kHz (speed loop frequency) |
Supported Feedback: | Smart Feedback Devices (SFD/SFD3). EnDat 2.2 and 2.1, BiSS, HIPERFACE, HIPERFACE DSL, incremental encoders, SIN/COS analog encoders and resolvers |
Communications: | MODBUS TCP, CANopen, EtherCAT, EtherNet/IP, PROFINET RT, SynqNet, DeviceNet, SERCOS, Ethernet TCP/UDP |
Safety functions: | STO SIL 2 PL d, CAT3 (AKD-x003 do AKD-x024); STO SIL 3 PL e, CAT4 (AKD-x048) |
Security features: | overload, overvoltage, overcurrent, undervoltage, overvoltage, etc. |
Inputs - outputs I/O: | 1 programmable analog input, 1 programmable analog output, 7 programmable digital inputs, 2 programmable digital outputs, 1 ENABLE input, STO input (expandable with expansion cards) |
Extension cards | IC - additional input-output extension card |
Configuration software: | AKD Workbench |
Built-in functions: | electronic gear, positioner, built-in braking module, dynamic braking, testing the resonant frequencies of the machine (Bode plot), advanced auto-tuning |
Brochure: AKD servo amplifiers
Instruction: Accessories for AKD and AKD2G servo amplifiers EUROPA EN
nstruction: Ifor communication AKD - CANopen_EN (REV Y)
Instruction: for communication AKD - EtherCAT_EN (REV U)
Instruction: for communication AKD - EtherNetIP_EN (REV H)
Instruction: for communication AKD - EtherNetIP_EN (REV H)
Instruction: for communication AKD - EtherNetIP_EN (REV H)
Instruction: for communication AKD - SERCOS III_EN (REV D)
Instruction: for AKD communication - SynqNet_EN (REV F)
Instruction: Security Note AKD-B_P_T_M (EN DE FR IT ES RU ZH) REV C
Instruction: AKD servo amplifiers - installation manual_EN (REV AD)
Instruction: Kollmorgen AKD Servo Amplifiers - Quick Start Guide EN (REV F)
Instruction: AKD series servo amplifiers - error codes_EN (REV U)
Instruction: User manual for AKD Workbench software - online help
Certificate: AKD 48A Safety-Cert-TUV_1_de_en
Certification: EAC for Kollmorgen servo amplifiers
Certificate: ISO 9001_2015 Kollmorgen
Certificate: CE Declaration of Conformity Kollmorgen AKD 3-24A REV 05_05_2020
Certificate: CE Declaration of Conformity Kollmorgen AKD 3-24A REV 05_05_2020
Certificate: Kollmorgen AKD RoHS10 declaration 2021
3D models: Kollmorgen AKD servo drives
Software: AKD Servo Drive WorkBench GUI Full Setup DE (REV 2.7.0.5821)
Software: AKD Servo Drive WorkBench GUI Full Setup EN (REV 2.7.0.5821)
Software: AKD Servo Drive Firmware (AKD-B-NBAN-01-20-00-001)
Software: AKD Servo Drive Firmware (AKD-B-NBSQ-01-20-00-001)
Software: AKD Servo Drive Firmware (AKD-P-NBAN-01-20-00-001)
Software: AKD Servo Drive Firmware (AKD-P-NBEI-01-20-00-001)
Software: AKD Servo Drive Firmware (AKD-P-NBS3-01-20-00-001)
Software: AKD Servo Drive Firmware and CANopen EDS (AKD-P-NBCN-01-20-00-001)
Software: AKD Servo Drive Firmware and EtherCAT Device Description (AKD-P-NBEC-01-20-00-001)
Software: AKD Servo Drive Firmware and PROFINET GSDML (AKD-P-NBPN-01-20-00-001)
The AKD Basic series servo drives have all the features of the AKD series servo drives plus an integrated programmable motion controller in BASIC. Programming is done using the integrated free programming environment. Thanks to the huge functionality of the AKD BASIC series servo drives, there is no need to use external PLC controllers. This reduces the design time, the amount of cabling and the mounting space in the control cabinet. It enables the execution of complex processes with high efficiency. Advanced, high-performance motion controller for controlling 1.5 axes (1 real axis, 1 virtual axis)
Standard execution:
- 7 configurable digital inputs (+1 dedicated for enable signal)
- 2 configurable digital outputs (+1 fault relay output)
- 1 analog input and 1 analog output
- Ethernet service port for commissioning, programming and Modbus TCP/IP communication
Extended version with additional I/O module:
- 20 digital inputs (1 dedicated for enable signal)
- 12 digital outputs (1 error relay output)
- 2 analog inputs and 2 analog outputs
- SD card for storing the program and current parameters
Series characteristics:
- available for the same powers and voltages as the AKD series
- programming language: BASIC, with the possibility of using conditional instructions.
- development environment: AKD WorkBench. Helpful features: auto syntax highlighting, autocomplete, auto formatting and code templates.
- code source protection with password protection
- BASIC supports conditional instructions, cam functions, S-curve ramps, unlimited motion profiles, and more for advanced motion
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |