- Compact design
- 24VDC power supply
- Easy installation and assembly
- Closed brake housing
- Low running costs
- The brake can be released manually
- High degree of protection IP54/IP65
- ATEX version on request
Electromagnetic brakes for screw jacks
Electromagnetic brakes designed for mounting on M1 to M5 lifting gears.
Contact
English contact
E-mail: export@pivexin-tech.com
Tel.: +48 32 438 73 01
German contact
E-mail: jb@pivexin-tech.com
Tel.: +48 32 438 73 11
Mob.: +49 (0)1522 5498 597
Electromagnetic brakes are designed to stop the screw jack in the event of a power outage to prevent the lifted load from falling automatically.
The brake is mounted to the gear with an adapter and installed on the gear shaft.
| Size | 2 | 4 | 8 | 16 |
| Dedicated to lifts | SG5 / M1 | SG10 / M2 | SG25 / M3 ; SG50 / M4 | SG100 / M5 |
| Holding moment | 4 Nm | 8 Nm | 16 Nm | 32 Nm |
| Maximum rotational speed | 6000 [rpm] | 5000 [rpm] | 4000 [rpm] | 3500 [rpm] |
| Minimum hole diameter | 8 [mm] | 10 [mm] | 11 [mm] | 14 [mm] |
| Maximum hole diameter | 15 [mm] | 15 [mm] | 20 [mm] | 25 [mm] |
| Outer diameter | 81 [mm] | 92 [mm] | 108 [mm] | 134 [mm] |
 | on request |