Linear Actuators
The EH series of ATLANTA linear actuators are designed for screw lift tables and other lifting elements.
- Working Load Limit from 15kN to 150kN
- Egress rate up to 5000 rpm
- Ingress rate up to 165 mm/s
- Duty cycle up to 100%
- Version with trapezoidal ball screw: rotating screw, non-rotating screw and extendable cylinder
German contact | English contact |
E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
Mob.: +49 (0)1522 5498 597 |
EH series linear actuators
EH linear actuators based on trapezoidal screw and ball screw.
Two sizes for lifting capacities from 30 to 160kN.
Technical data:
- Two sizes: EH4 and EH8
- Lifting capacity: 30-160 kN
- Design with trapezoidal self-locking screws: -rotating and non-rotating screws
- Trapezoidal bolt and ball screw design with increased payload: rotary bolts, pistons
- Circumferential backlash of gearbox <12arcmin
- Egress rate up to 5000 revolutions per minute
- Speed: trapezoidal screw drive up to 42mm/sec; ball screw drive up to 165mm/sec
- Duty cycle:trapezoidal screw drive up to 20% (load dependent); ball screw drive up to 100%
- Operation with 3-phase AC motors and servo motors
EH series linear actuators with non-rotating trapezodial screw
Technical data:
- The trapezoidal screw makes a lifting motion
- The screw goes through the gearbox
- Flanges and clutches for AC 3-phase motors and servo motors
Accessories:
- Mounting flange
- Folding cover
- Spherical plain bearing
- Protective tube
- Element for safe stop
- Mechanical or inductive safety interlock
EH series linear actuators with trapezodial/ball screw
Technical data:
- The trapezoidal/ball screw makes a lifting motion
- Flanges and clutches for AC 3-phase motors and servo motors
Accessories:
- Mounting flange
- Folding cover
- Spherical plain bearing
- Element for safe stop
EH series extended piston linear actuators
Technical data:
- Ball screw with cylindrical nut in special execution
- Anti-rotation protection due to long wedge
- The nut causes the piston to slide outwards
- Flanges and clutches for AC 3-phase motors and servo motors
Accessories:
- Front connection via toggle or thread
- Pivot block for the gearbox
- Design for outdoor use on request