DC motors
EC series motors are a good choice wherever the power source is 24 or 12VDC. They are characterized by high quality, flange mounting (in accordance with the IEC standard), overload resistance and dynamics.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
-
Magnetic poles created by permanent magnets,
Tube construction, no fan,
Available in 5 sizes: diameters 42, 52, 65, 80, 110 mm,
Output flanges according to IEC standard EC070 and above – smaller motors outside the standard,
Low voltage supply, 12 or 24 VDC.
Rated power available from 30 to 800 W S2,
IP44 protection degree,
F insulation class,
Form factor 1,
High starting torque,
High torque and power output in a compact housing,
From EC050 upwards almost all powers available also with brake (24 or 12 VDC).
Versions "24E" adapted for encoder (shaft at the back, mounting holes),
Possibility to supply with ME22 encoder,
From EC100 available brushes (as spare part),
From EC100 available version with IP65 sealing.
The EC IP66 series motors are a good choice wherever the power source is 24 or 12VDC DC and a higher motor tightness class is to be ensured. They are characterized by high quality, flange mounting (in accordance with the IEC standard), overload resistance and dynamics.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
-
Magnetic poles created by permanent magnets,
Tube construction, no fan,
Available in 3 sizes: 81mm, 104mm, 112mm diameter,
Output flanges according to IEC standards.
Low voltage power supply, 12 or 24 VDC,
Available rated power with values from 140W to 800W S2,
Protection degree IP65,
Insulation class F,
Form factor 1,
High starting torque,
High torque and output power in a compact housing
The ND series are the best DC motors in our offer. They owe their extraordinary dynamics, power, low inertia and resistance to overloads to the use of rare earth magnets - a costly solution, but guaranteeing the highest quality.
| German contact | English contact |
| E-mail: jb@pivexin-tech.com | E-mail: export@pivexin-tech.com |
| Tel.: +48 32 438 73 11 | Tel.: +48 32 438 73 01 |
| Mob.: +49 (0)1522 5498 597 |
-
Magnetic poles created by rare earth magnets,
Tube construction, no fan,
Two powers available (160W and 250W in S2).
Output flanges according to IEC-56 B14 standard,
Low voltage power supply, 12 or 24 VDC,
Protection degree IP44,
Insulation class F,
Form factor 1,
Very high starting torque,
High power achieved in a half size compared to standard,
Also available with brake (24 and 12VDC),
Adapted for encoder (shaft at the back, mounting holes),
Possibility to deliver with ME22 encoder.